Model # NA
Brand/Model: Deep Blue Master 1000 Automatic Diver
Movement: Japanese automatic
(Seiko/SII)
Material: stainless steel case,
stainless steel bracelet or rubber strap
Complications: date display
Price: approximately $300 USD depending on exact
model and options
Plenty of photos follow the review.
Click on the pictures to enlarge.
The micro-brand
movement has never been stronger in the world of watch collecting. Micro-brands or boutique brands are usually
watches manufactured in China using Chinese, Japanese or Swiss movements and
sold direct to the consumer through the company’s web site. For the buyer, these brands offer an array of
styles and features for prices that are very attractive when compared to
name-brand watches with the same features.
There can be downsides
to purchasing a micro-brand watch, mainly in the area of warranty service or
repair. Many micro-brands produce their
specific models in limited quantities and once that model is sold out, getting
replacement parts in terms of a dial or handset could be difficult.
The movements, if
they’re Japanese or Swiss, usually won’t pose a problem for service, as any
competent watchmaker outside of the micro-brand company’s repair facility
should be able to service the movement.
Also, many micro-brands
are sold on a pre-order basis, so buyers sometimes have to wait weeks or months
for their watches to arrive, but if they are patient, the wait can be
worthwhile. One nice aspect of the
micro-brand movement is that many of these watches get flipped by early buyers rather
quickly for a variety of reasons, so buyers can pick them up at the same or
even lower prices, without having to wait for the watch to be produced.
Overall, the
micro-brand revolution has added a fun and exciting dimension to our watch
hobby and most of the micro-branded watches I have owned over the years have proven
themselves to be worth the price of entry and have been just as reliable as
name-brand timepieces.
This introduction
gets me to the subject of this review, the Deep Blue Master 1000 series of dive
watches. Deep Blue has been around since
2007 and offers a vast array of diver style watches with a seemingly endless
array of features, dial colors, bezel materials, etc. Their quality is strong and the brand has
decent resale value.
Back in June of
2011, I reviewed the Deep Blue Master 2000 automatic diver, a watch I have
since sold but now regret selling, as it was a solid, bold and great looking
watch.
But since then, I
have recently acquired not one, but two, Deep Blue Master 1000 automatic
divers, which are being reviewed here. I
will deviate a bit from my normal format of reviews due to the fact that I am
covering two watches instead of one, but the results will be the same, that is,
a comprehensive look at both pieces.
To begin with, the
things that are the same with my two examples:
-Model (Deep Blue
Master 1000)
-Movement (Japanese
Seiko/SII NH35A 24-jewel automatic with hacking and manual-wind capability)
-Case size and
material (45mm stainless steel)
-Caseback
(screwdown stainless steel with embossed diver and individual serial number)
-Crown and HEV
(signed screwdown crown at 3 o’clock and manually operated helium escape valve
at 10 o’clock)
-Crystal (very
slightly domed sapphire)
-Luminosity (both
blue lume, very average intensity)
-Complications
(date display at 3 o’clock)
-Dial printing (Deep
Blue name and logo under 12; ‘Master 1000’, ‘automatic’ and 300M/1000ft’ above
the six position)
-Water resistance
(factory rated at 300 meters)
-Bracelet/Strap (standard
rubber/silicone strap; optional stainless steel solid link bracelet with solid
end links and machined deployant with pushbutton double locking clasp)
-Presentation
(zippered nylon hardback carry case)
And the
differences:
-Bezel insert material
and color (green ceramic vs. black/blue aluminum insert; the actual metal bezel
itself is the same with both watches)
-Bezel lume (full
lume bezel markings on ceramic vs. lume pip at 12 o’clock with aluminum insert)
-Dial color and
markers (green with rectangular markers as part of the chapter ring vs. black
with round applied markers rimmed in silver)
-Hand set (white
sword style outlined in black vs. black stick minute and white hour hands)
The Master 1000
stainless steel case is nicely finished and fully brushed, with a smooth satin
look and feel. The watch does not wear overly
large and due to the downward curve of the lugs, fits the wrist nicely. The watches also have a good heft to them,
which is something I appreciate, especially in a dive watch. After all, if the watch can go to 300 meters
deep, you want it to feel like it can go that deep and not be a delicate doily
on the wrist.
Case dimensions are
45.1mm wide; with winding crown it measures 49.3mm. Lug-to-lug measurement is 52.2mm.
The crown is
perfectly sized, signed with the Deep Blue logo and knurled for an easy
grip. It screws down with about three
full turns. Small crown guards help
protect the crown from accidental knocks and bumps without getting in the way
of winding or setting the watch.
One nice thing
about this watch, even though it is 45mm in size, it wears smaller and doesn’t
feel overly large on the wrist, due to the curvature of the lugs as mentioned
above.
Lug spacing is 22mm
and thickness is 15mm. The caseback is
stainless steel, embossed with a diver logo and the Deep Blue name and
individually serialized. Of course, the
caseback screws down to maintain water resistance.
A manual screwdown
helium escape valve (HEV) is located on the left side of the case at the 10
position. On both of these examples of
the Master 1000, I found the HEV to be too tight, it was very hard to turn to
open and close.
Overall fit and
finish is excellent, especially for the price and the look and feel is one of
solidity, quality and strength.
The Deep Blue
Master 1000 is factory rated for 300 meters/1,000 feet of water resistance.
The real
differences between these two Master 1000 models is in their dial and hand set
presentation.
The green dial
model has white sword style hands outlined in black with white rectangular
markers that are integral with the white chapter ring encircling the dial, so
in a sense, they are applied, but more like being overlayed on the dial, which
is fine. The seconds had is a simple
black stick with a lumed circle towards the tip.
The shade of green
on this dial is what attracted me to this watch. Many people don’t care for green dial
watches. I like the color for a watch,
but it has to be the right shade, as lots of green dials are too minty or too
shiny for my tastes. This Deep Blue
green dial hits the mark perfectly for me.
Both watches have a
quickset date window at the 3 position.
The date wheel is black on white and setting and alignment within the
window is good.
Relatively minimal
dial printing is present on both models and is identical, as listed above.
The black dial
Master 1000 has a semi-sunburst black dial that has hints of grey in it, it’s
rather a charcoal dial with a bit of shine.
This dial features applied round markers rimmed in silver tone. The markers at 3, 6 and 9 are rectangular and
the marker at 12 is an inverted triangle.
All the markers on both watches are blue lume and glow, but not that
brightly.
A simple white
chapter ring is printed on the black dial with hash marks for the minutes.
The handset on the
black dial model is comprised of stick hands; the hour hand is smaller and
white outlined in black, so it tends to disappear a bit on the dial. The minute hand is white and outlined in
silver tone and is wider than the hour hand to stand out more. The seconds hand is the same as the green
dial model, except that it is dark blue in color, and once again, save for the
lume ball end, it tends to get lost a bit on the dial.
The bezels are also
different on these watches. The actual
metal part of the bezel is the same, as is the 120-click unidirectional
motion. The bezels are fairly tight with
a bit of backlash.
The green dial
model has a sharp looking green ceramic bezel insert that has the perfect
ceramic gloss to it. Some watches as of
late feature ceramic bezels, but are matte in finish and it’s hard to tell that
they are actually ceramic (my Omega Planet Ocean 8500 is a good example of
this).
The green bezel
insert has lume-filled hash marks and arabics around the entire bezel and a
lume-filled inverted triangle at the 12 position. All-in-all, this bezel is a winner.
The bezel insert on
the black dial model is much more plebian in nature. It’s a standard aluminum insert that is half
black (from the 45 to the 15 marks) and half dark blue (from the 15 clockwise
to the 45 marks). Obviously, this color
combo was chosen to mimic the Rolex ‘BLNR’ watch has a blue and black ceramic
bezel.
The bezel here
almost doesn’t look two-tone because the blue is so dark it blends into the
rest of the black shades on the watch.
This isn’t a demerit so much as a disappointment. If you’re going to make a two-tone bezel,
make it stand out as such. There is also
a slight dimple at the 41 mark on the bezel insert, presumably a point that got
missed in QC. Not a huge issue, but
again, the insert should be perfect.
The only lume on
the black and blue bezel is the lume pip at the 12 position.
Covering the dials
on both models is a slightly curved sapphire crystal that exhibits no
distortion or undue glare.
My biggest disappointment
with both of these Master 1000 models is the lume. The quality, brightness and application all
seem lacking, which is a puzzle since Deep Blue prides themselves on generous
applications of luminous material to really make their watches glow. I would rate both watches only average (and on
the low end of average at that) in regards to their luminosity.
When it comes to
the movement in these Deep Blue Master 1000 models, as stated previously, they
both sport the hearty Seiko/SII NH35A automatic, which is the same as Seiko’s
4R36 movement.
The NH35A runs in
24 jewels and beats at 21,600 vph. The
movement can be manually wound and it also hacks. Much has been written about this engine and
it is found in a wide range of watches and in many micro-brands.
My only complaint
with the various examples of this movement I have owned is that is varies quite
a bit in accuracy. Some examples run
slow, others fast and still others more spot-on, which leads me to believe that
if the time is taken to regulate it at the factory, it can keep very good time.
In the green dial
Master 1000, the NH35A was timed by me at +15 seconds over 24 hours in the
crown up position. Conversely, the black
dial Master 1000 ran at -3 seconds over 24 hours in the same crown up
position. See what I mean?
Power reserve on
both watches is fine, the green dial at 44 hours and the black dial at 44.5
hours. No complaints here. Both movements wind and set fine and the
crown action is good. Overall, the NH35A
movement in these Deep Blue models performs acceptably and I have no doubts
about the reliability and durability of this movement over the long term.
Deep Blue sells
most of its watches with a rubber/silicone dive strap and the stainless steel
bracelet is sold as an accessory item.
The bracelet as seen on the green dial model is the same as the bracelet
that came on the black dial Master 1000.
I removed the bracelet on the black dial and installed an aftermarket
22mm grey leather strap, but retained the factory signed buckle from the rubber
strap that also came with the watch.
I found the rubber
strap to be too bulky and not wrist hugging enough for my smaller wrist, mainly
due to the fact that it’s one of those rubber straps that fits against the case
as a bracelet with solid end links would, that is to say there is no gap
between the strap and case. This doesn’t
allow the strap to flex downward enough for a good fit if your wrist is too
small, hence the reason I installed the leather strap.
One small note, the
case is relatively well finished on the inside of the lugs and case sides that
are normally covered by the bracelet end links or rubber strap ends. The watch looks good on the leather strap
with these areas exposed.
The factory rubber
strap is of decent quality and is not scented (that you very much) and would
work well for people of a thicker wrist.
The stainless steel
bracelet is a quality item, with solid links, solid end links and a signed,
double locking clasp with machined deployant.
The bracelet measures 22mm at the lugs and tapers to 20mm at the clasp.
The bracelet is
brushed in the same smooth satin finish as the case and it looks great. The links are held in place by standard split
pins and there are three micro-adjustment holes in the clasp to achieve a good
fit. Sizing of the bracelet posed no
problems.
If you’re thinking
of getting a Deep Blue, the relatively small amount of extra money for the
bracelet is dollars well spent, as it’s a good piece.
Presentation as
noted above is a hard-back black nylon zippered case, with the strap inside (if
you order the bracelet, the watch comes on the bracelet with the strap inside
the case), along with the instructions and warranty. The case would make a nice travel case if you
choose to use it that way.
In summary, both of
the Deep Blue Master 1000 divers reviewed here are quality, affordable watches
that are true divers, I wouldn’t hesitate to get them wet. Given the variety of designs Deep Blue
offers, this brand should have something for every aficionado of dive
watches. The green dial and black dial
Master 1000s are nifty watches that come highly recommended.
Pros: nice case finish and good case size, quality
accessory bracelet, Seiko automatic movement is solid, affordability
Cons: lume
could be a lot better, its application and brightness leaves something to be
desired, accuracy could be a bit tighter in some examples, HEV valve was very
hard to turn open or close
Verdict: very
good quality and modest price equate to value and Deep Blue brings that
equation home with the Master 1000 series.
Good looks and solid construction contribute to a tool watch that is a
strong piece, even if you don’t get it wet.
Thanks for reading
and enjoy the pics.
Excelsior!
-Marc
