Model # 643.10.172 (discontinued)
Brand/Model: Fortis B-42
GMT/Chronograph Automatic
Movement: Swiss automatic
Material: stainless steel case
and bracelet
Complications: date display,
24-hour GMT hand (independently adjustable), chronograph timing in one-second
increments up to 12 hours
Price: MSRP around $4,500 USD
(when sold new, now discontinued)
Plenty of photos follow the review.
Click on the pictures to enlarge.
This Fortis B-42
GMT/chronograph automatic may look familiar to regular readers of this blog, as
it was featured as the main page photograph for a good many months. People really seem to react to the look of
this watch, with its stunning blue hands and blue bezel, it is hard to
resist. Even though this watch is now
discontinued, I’ve been wanting to review it, because it is a superb piece and
Fortis does make similar models now.
This also happens to be a very photogenic watch, so please enjoy the
pictures!
The B-42 line from
Fortis is quite varied, with standard and chronograph models both available,
along with alarm and GMT complications.
This particular B-42 GMT/chronograph is a very rare piece; it was
offered in the silver/white dial with blue hands both with and without the
rotating bezel. I believe the model
being reviewed here is the rarer of the two.
For starters, this
is a heavy and substantial watch, which is fine, but be forewarned if you
dislike big stainless steel chunks sitting on your wrist. The all stainless steel case is finely
brushed and lends a nice tool-like look to this watch. The case measures 44mm without the large,
signed and non-screw down crown; 48.1mm crown included. The crown itself measures 8.4mm in
diameter. Although these dimensions
sound large, the watch does not wear overly large nor does it look clownish on
the wrist. This is partly due to the
relatively short lugs, with a lug-tip to lug-tip measurement of just 52.6mm.
Lug spacing is
20mm, case thickness is 15.4mm. While
20mm lugs may sound dainty on a 44mm sized watch, the bracelet is a continuous
width design and fairly chunky, so it matches the size and heft of the watch
well.
The caseback is a
screwdown display type that shows off the automatic movement with signed Fortis
rotor with blue accents. Fairly nifty.
Build quality is
generally good, along with fit and finish, but I do know some owners of this
watch that have had the blue finish on the arabics start to deteriorate. Mine is fine thus far.
This B-42 GMT/chronograph
is factory rated for 200 meters of water resistance and does so without a
screwdown crown. Many people think a
screwdown crown is a necessity for water resistance (especially at this depth)
but the main function of a screwdown crown is to insure that the crown does not
get pulled out, thus stopping the watch during an underwater maneuver. Gasket design, construction and utilization
make a watch water resistant and I have no doubt this Fortis would survive the
wet and wild depths without any problems.
The chronograph
pushers are large and round, which makes them easy to use. Overall, there is nothing superfluous about
the construction of this watch, it all makes sense and looks good doing it.
The dial is a light
silver which trends towards white in most light. It offers a nice contrast to the blue applied
arabics on the dial, along with the blue hands and blue bezel. The hour and minute hands are blue skeleton
type, with luminous pointer tips. The
24-hour GMT hand is a simple black stick with a pointer tip in a lighter shade
of blue.
The subdials on the
watch (subdial at 9 is the watch seconds hand, subdial at 12 is the 30-minute
chronograph totalizer and the subdial at 6 is the chronograph 12-hour
totalizer) are ever so slightly recessed on the dial and are presented with
simple black printing with blue hands.
The chronograph seconds hand is blue with a lume dot about two-thirds of
the way up its shaft.
There are small
square lume blocks at each five minute mark on the dial and a lume triangle at
the 12 position. Although the lume on
this watch is rather sparse, it does a decent job; I rate the lume as ‘good’
according to my unofficial lume-o-meter (my eyes).
Minimal dial
printing (always a good thing to me) consists of the Fortis name and crown logo
just above the date window at 3, a printed ‘GMT’ to the left of the date window
and very small wording below the date window of ‘chronograph’ and ‘automatic.’
A couple of notes
on the dial. A quickset date is at the
three position, with a standard black on white date wheel. Alignment of the date wheel within the window
is good. To the right of the date window
is a black triangle pointer and to the left of the GMT printing is a blue
triangle pointer.
Fortis had the
foresight to use these pointers as a reminder which way to turn the crown to
set the appropriate complication. In
this case, turn the crown clockwise in the first-click setting position to set
the date and turn the crown counter-clockwise in the first-click setting
position to rotate the 24-hour GMT hand to the desired timezone position.
The arrows are a
nice touch, especially since 7750-based GMT watches work opposite of a standard
ETA 2893-1 GMT movement, where the GMT hand is set by turning the crown
clockwise and the date is set by turning the crown the other way. This is primarily because the 7750 was not
designed to be a GMT movement, but can be used as a GMT by removing the day
wheel complication and replacing it with a GMT hand. A simple and effective way to gain GMT
functionality.
The other item of
note on the dial is the way Fortis decided to present the GMT format. Instead of having the 24-hour chapter ring
run from 1 to 24 hours starting at the 12 (or midnight) position, they have
made the chapter ring run from 12 to 24 hours from the 12 to the 6 position and
1 to 12 hours back from the 6 to the 12 position. This countdown style may be a preferred
method for some pilots or ship captains, although I really don’t know. Of all the GMT watches in my collection, this
is the only one that presents the 24-hour GMT track in this fashion.
There are also
small black minute arabics just inside the 24-hour GMT track, with plain black
markers for the remainder of the minutes.
The small minute arabics tend to compete with the GMT hour markers,
because they are the same size and color.
A bit distracting at first and not a huge error, but something worth
mentioning anyway.
Topping the dial is
a flat sapphire crystal with anti-reflective coating. The beautiful blue bezel is a 120-click
unidirectional style with a lume pip at the 12 and standard markings; arabics
every 10 minutes with hash marks for the other minutes. The bezel is easy to rotate but does has a
bit of backlash.
Overall, the dial,
while conveying a lot of information, is a clean and easy-to read layout. The chronograph seconds hand is a bit hard to
see at times if you’re not tracking its movement by its lume ball, but otherwise,
I have no real complaints about the dial.
And with all the blue hands, it looks absolutely stunning.
Inside the B-42
GMT/chronograph is the well-regarded Valjoux 7750 Swiss Made automatic
chronograph movement, modified for the GMT complication as mentioned
earlier. All functions on this watch
(chronograph start/stop/reset, GMT hand setting, date setting, winding, etc.)
all work well. Of course, the movement
hacks and manually winds (easy to do with the large crown) and runs extremely
well in this example. Power reserve is a
good 49-¼ hours and accuracy has been measured at plus or minus a couple
seconds a day both on and off the wrist.
The bracelet is
very nice on this B-42. It is a fully
brushed, solid link stainless steel design with solid end links, a signed
double locking clasp with machined deployant and a stamped steel dive extension. There are five micro-adjustments on the clasp
and since the links themselves are rather narrow, there is no need for any
half-links.
The bracelet
measures 20mm at the lugs with no taper to the clasp. Two things I love about this bracelet are the
easy to adjust links with screwbars and a screw on one end and the awesome
screwbar arrangement that secures the bracelet to the watch head.
As many of you
know, removing or installing a bracelet on a watch that uses standard spring
bars can be a temper-testing exercise.
Fortis uses robust screw bars that can only be inserted one way into the
watch lugs and it is a cinch to insert these bars through the bracelet ends and
secure the bar with the large end screw.
Very slick!
While this B-42
model is discontinued, it is well worth seeking out. It combines no-nonsense tool watch
personality with superb functionality and a great look (gotta love that blue!) that
will make it a star in any collection. A
real winner from Fortis, too bad it was discontinued.
Pros: easy to use functionality, great blue-tone hands
and bezel, large crown, hefty size and weight but not overly so, accurate and
reliable Swiss engine
Cons: perhaps a bit too chunky for some, odd
ergonomics in relation to the GMT chapter ring, could use a bit more lume,
pricey when new
Verdict: a super functional, super attractive
GMT/chronograph that is a strong value on the used market, providing you can
find one. Well worth seeking out, this
Fortis B-42 is a winner on almost every level.
Thanks for reading
and enjoy the pics.
Excelsior!
-Marc
